Daewoo CB647M-EX, Manual

Page: 99 / 116

ZZ Active in Suspend
- Determines whether to assert the ZZ signal while in
suspend mode or not. The available options are :
- Disabled(default)
- Enabled
VGA Active Monitor
- Determines whether to reload burst timer while PCI
accesses to VGA I/O addresses or the A and B segment video memory
ranges or not. The available options are :
- Enabled(default)
- Disabled
S o f t - O ff by PWR-BTTN
- Sets power button override function. It needs to
p re s s power button for over 4 seconds to power off a system if this
option is set by “Delay 4 Sec.” The available options are :
- Delay 4 Sec(default)
- Instant-Off
C P U FAN Off In Suspend
- Turns off CPU fan while in suspend mode.
The available options are :
- Enabled(default)
- Disabled
Resume by Ring
- Sets to wake up/resume from suspend-off state by alarm
i n t e r rupt. “Disabled” is a default. Selects “Enabled” to enter re s u m e / w a k e
up date, and times. The available options are :
- Disabled(default)
- Enabled
Resume by Alarm
- Sets to wake up/resume from suspend-off state by
alarm interrupt. “Disabled” is a default. Selects “Enabled” to enter
re s u m e / w a k e up date, and times. The available options are :
- Disabled(default)
- Enabled
If users set the option to “Disabled”, “Date(of Month) Alarm” and
“Time(hh:mm:ss) Alarm” options below will not be shown on the screen.
Date(of Month) Alarm / Time(hh:mm:ss) Alarm
- Set the alarm interru p t
date and time.
The item “Break Event From Supend” is for setting the resume events while
system enters the suspend mode.
3. Built-In BIOS Setup Program
3 - 1 7
CB647M-LX/EX(3장) 00.9.18 3:53 PM 페이지3-17