Daewoo CB647M-EX, Manual

Page: 102 / 116

Reset Configuration Data
- To clear the ESCD data which is stored in flash
ROM, please set “Enable”. This is a one short switch. After clearing the ESCD,
the BIOS will change the value back to “Disabled”. The available option are :
- Disabled(default)
- Enabled
PCI IDE IRQ Map To
- Most of PCI IDE cards are non-PCI compliant.
Defines the IRQ Routing to make them work pro p e r l y.
The available options are :
- PCI-AUTO ( d e f a u l t )
- ISA
- PCI-SLOT 1 - PCI-SLOT 2
- PCI-SLOT 3 - PCI-SLOT 4
If user sets this option to “ISA”, both the “Primary IDE INT#” and
“Secondary IDE INT#” options below will not be shown on the screen.
Primary IDE INT#
- Selects a PCI Interrupt pin which will be used by the
primary channel of a PCI IDE card. The available options are :
- A (default)
- B/C/D
Secondary IDE INT#
- Selects a PCI Interrupt pin which will be used by the
secondary channel of a PCI IDE card. The available options are :
- B (default)
- A/C/D
Used MEM base addr
- This option will be shown only when “Resourc e s
C o n t rolled By” option is set to “Manual”.
The available options are :
- N/A (default)
- C800/CC00/D000/D400/D800/DC00
Used MEM Length
- If the option “Used MEM base addr” is set to “N/A”,
this option will not be shown on the scre e n .
The available options are :
- 8K(default)
- 16K/32K/64K
Assign IRQ For VGA
- To assign IRQ which will be used by Video card. The
available options are :
- Enabled(default)
- Disabled
Assign IRQ For USB
- To assign IRQ which will be used by USB device. The
available options are :
- Enabled(default) - Disabled
CB647M-LX/EX User's Manual
3 - 2 0
CB647M-LX/EX(3장) 00.9.18 3:53 PM 페이지3-20