Daewoo CB647M-EX, Manual

Page: 83 / 116

3. Built-In BIOS Setup Program
This chapter contains information about:
How the SETUP program allows you to configure the functions and
devices of your computer
How to configure each item on the SETUP Menus
B e f o re the computer can operate, it must know what devices are installed in
it. These devices include floppy and fixed-disk drives, video, and so forth.
Taken together, the presence or absence of these devices comprise the
system configuration. Use the SETUP program to verify or change the
system configuration.
O rd i n a r i l y, there should be no need to run SETUP the time you start your
system, since your computer comes from the factory ready to use. Yo u
must, however, run the SETUP program each time you make any changes
to your computer’s configuration, such as adding drives, and so forth. Yo u
can also run it to verify the system configuration.
Starting SETUP
The SETUP program is permanently stored in a “Flash EEPROM” and not
contained on disk. The SETUP program can be accessed :
When powering up the system
When resetting the system
When the system detects an error and prompts for the SETUP pro g r a m
3. Built-In BIOS Setup Program
3 - 1
CB647M-LX/EX(3장) 00.9.18 3:53 PM 페이지3-1