Daedong Kioti LK30, Workshop Manual

Page: 88 / 326

2-36 SS41-W00 May. 2007
LK30
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
ENGINEENGINEENGINEENGINEENGINE
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
1
5.6 INJECTION TIMING MEASURE-
MENT AND ADJUSTMENT
NOTE:
• Perform the work with the engine installed in the
tractor.
1. Remove the engine stop solenoid (1).
704W2D4C
T46W257A
2. Remove the timing check window cover of the fly-
wheel housing.
3. Turn the crankshaft so that the mark (1FI) on the
flywheel is in the window.
4. When the mark is found, turn the crankshaft coun-
terclockwise approx. 30° (when looking at the front
of the engine).
T46W258A
- When turning the crankshaft, use a special ser-
vice tool (socket) for turning the crankshaft by
engaging it with the socket wrench.
NOTE:
• How to make the crankshaft turning socket
a. Cut the coupler (DAEDONG part No.: 37805-4452-1)
in half.
b. Weld the 1/2” socket to the coupler.
c. You can use DAEDONG special tool kit
(part No.: G0611-B0010).
T46W259A
ENGINE - MEASUREMENT AND ADJUSTMENT
Lk30_02_engine(01-38).p65
2007-07-26, ¿ÀÈÄ 12:04 Page 36
Adobe PageMaker 6.5K/Win