Daedong Kioti LK30, Workshop Manual

Page: 312 / 326

10-26 SS41-W00 May. 2007
LK30
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
ENGINEENGINEENGINEENGINEENGINE
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
Body
Battery
265WA26A
B. MOTOR OPERATING TEST
1. Disconnect the battery positive cable and the leads
from the starter.
2. Remove the starter motor from the engine.
3. Connect a battery positive cable (at least 20sq) to
starter motor B+ terminal and battery positive
terminal.
4. Ground the motor body.
5. Connect a jumper lead (at least 3sq) to battery posi-
tive terminal.
6. When you connect the jumper lead to the magnet
switch, the starter motor operates.
If the test result is not as described, replace the starter
motor.
A. VOLTAGE TEST (B+ TERMINAL)
1. Measure the voltage with a voltmeter across the B
terminal and chassis.
2. If the voltage differs from the battery voltage, the
battery’s positive cable or the battery negative cable
is faulty.
NOTES:
• If you can’t start engine, this is your first step.
•
Secure the starter motor in a vise to prevent it
from jumping up and down while testing the motor.
CAUTION
4.1.5 STARTER MOTOR
ELECTRIC SYSTEM - SERVICING
265WA51A
Body
Lk30_10_electric.p65
2007-07-26, ¿ÀÈÄ 12:07 Page 26
Adobe PageMaker 6.5K/Win