Daedong Kioti LK30, Workshop Manual

Page: 122 / 326

2-70 SS41-W00 May. 2007
LK30
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
ENGINEENGINEENGINEENGINEENGINE
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
265W261A
D. INJECTION PUMP GEAR SIDE CLEARANCE
1. Pull the fuel camshaft and pull the injection pump
gear (1) to each end.
2. Measure the clearance A between the injection pump
gear (1) and the snap ring (2) on the fuel camshaft.
3. If the clearance exceeds the allowable limit, check
the gear, the bearing and the key.
(1) Injection pump gear (2) Snap ring
Allowable limit
0.9 mm
0.035 in.
0.15 ~ 0.57 mm
0.0059 ~ 0.0224 in.
Side clearance
Item Factory spec.
265W260A
265W259A
B. IDLE GEAR SIDE CLEARANCE
1. Pull the idle gear collar 2 (1) and push the idle gear
(2) to each end.
2. Measure the clearance A between the idle gear and
the idle gear collar 2 with a feeler gauge.
3. If the clearance exceeds the allowable limit, replace
the idle gear collar 1 (3).
(1) Idle gear collar 2 (3) Idle gear collar 1
(2) Idle gear
C. CAM GEAR SIDE CLEARANCE
1. Pull the cam gear (2) with the camshaft (1) to its
end.
2. Measure the clearance A between the cam gear (2)
and the camshaft stopper (3).
3. If the clearance exceeds the allowable limit, replace
the camshaft stopper (3).
(1) Camshaft (3) Camshaft stopper
(2) Cam gear
Allowable limit
0.9 mm
0.035 in.
0.20 ~ 0.51 mm
0.0079 ~ 0.0201 in.
Side clearance
Item Factory spec.
Allowable limit
0.3 mm
0.0118 in.
0.07 ~ 0.22 mm
0.0028 ~ 0.0087 in.
Side clearance
Item Factory spec.
1
3
A
2
ENGINE - SERVICING
Lk30_02_engine(41-82).p65
2007-07-26, ¿ÀÈÄ 12:04 Page 70
Adobe PageMaker 6.5K/Win