Daedong Kioti LK30, Workshop Manual

Page: 87 / 326

2-35 SS41-W00 May. 2007
LK30
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
ENGINEENGINEENGINEENGINEENGINE
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
TDC
Overlap
BDC
1 2 3
TDC
BDC
1 2 3
265W221A
(A) Gear case
704W249C
5.5 VALVE CLEARANCE
1. The valve clearance should be measured only
when the engine temperature is equal to the ambi-
ent temperature.
2. Disconnect the negative battery cable.
3. Remove the cylinder head cover.
4. Turn the crankshaft using the crankshaft turning
socket until the intake valve of the No. 2 cylinder
and the exhaust valve of the No. 3 cylinder move
simultaneously and the rocker arm height of these
two valves is same.
5. Measure the clearance of the intake and exhaust
valves of the No. 1 cylinder, the exhaust valve of the
No. 2 cylinder and the intake valve of the No. 3
cylinder. Adjust the clearance if necessary.
6. Turn the crankshaft 360° and measure the clear-
ance of the intake valve of the No. 2 cylinder and the
exhaust valve of the No. 3 cylinder. Adjust the clear-
ance if necessary.
z
: closed,
{
: open
265W282B
z
: closed,
{
: open
265W283B
7. If the clearance is not within spec. ; adjust. See
above.
After one turn
1 2 3
IN. EX. IN. EX. IN. EX.
When the No. 1 cylinder is at T.D.C.
1 2 3
IN. EX. IN. EX. IN. EX.
Valve clearance
Item
In. : 0.25 mm (0.0098 in.)
Ex. : 0.3 mm (0.0118 in.)
Factory spec.
ENGINE - MEASUREMENT AND ADJUSTMENT
Lk30_02_engine(01-38).p65
2007-07-26, ¿ÀÈÄ 12:04 Page 35
Adobe PageMaker 6.5K/Win