Daedong Kioti LK30, Workshop Manual

Page: 49 / 326

1-33 SS41-W00 May. 2007
LK30
CLUTCHCLUTCHCLUTCHCLUTCHCLUTCH
ENGINEENGINEENGINEENGINEENGINE
TRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSIONTRANSMISSION
FRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLEFRONT AXLE
STEERINGSTEERINGSTEERINGSTEERINGSTEERING
BARKEBARKEBARKEBARKEBARKE
ELECTRICELECTRICELECTRICELECTRICELECTRIC
INDEXINDEXINDEXINDEXINDEX
HYDRAULICHYDRAULICHYDRAULICHYDRAULICHYDRAULIC
GENERALGENERALGENERALGENERALGENERAL
REAR AXLEREAR AXLEREAR AXLEREAR AXLEREAR AXLE
265W151A
9.2 TREAD
•
Do not turn front discs to obtain wider tread.
IMPORTANT
9.2.1 FRONT WHEELS
Front tread can not be adjusted.
(A) Tread
7 - 14
Farm
27 x 8.50 - 15
Turf
25 x 8.50 - 14
IND
Tire Tread
1,115 mm
(43.9 in.)
1,161 mm
(45.7 in.)
1,180 mm
(46.5 in.)
* IND… for Industrial
9.2.2 REAR WHEELS
Rear tread width can be adjusted as shown with the standard equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and left) to the desired position, and then tighten the bolts.
Always attach tires as shown in the drawings.
• If not attached as illustrated, transmission parts
may be damaged.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques then recheck after
driving the tractor 200 m (2219 yards) and there-
after according to service interval.
(See “MAINTENANCE” section)
IMPORTANT
11.2 - 24 Farm
Model
1,020 mm
(40.2 in.)
1,060 mm
(41.7 in.)
1,134 mm
(44.7 in.)
1,150 mm
(45.3 in.)
1,268 mm
(49.9 in.)
13.6 - 16 Turf
41 x 14.0 - 20 Turf
15 - 19.5 IND
Model
1,145 mm (45.1 in.)
1,174 mm (46.2 in.)
1,202 mm (47.3 in.)
(A) Tread
(1) Bolt, Nuts (216 Nm, 22 kgf-m, 159 lb-ft)
(A) Tread
265W152A
GENERAL - TIRES
Lk30_01_general.p65
2007-07-26, ¿ÀÈÄ 12:04 Page 33
Adobe PageMaker 6.5K/Win