Dabir Surfaces DabirAIR CA-1001, Instructions For Use Manual

Page: 19 / 32

7 Information Center: Error Codes and Alarms
The User Interface panel includes an “INFORMATION CENTER” to aid users in diagnosing potential
problems (see image below).
If the Pneumatic Controller detects a potential problem, one or more of the following three (3) text
displays will illuminate with its associated feedback codes depending on the problem:
SERVICE UNIT (Potential Code: Continuous, Blinking, Audible Tone)
CHECK CONNECTIONS
(Potential Code: Continuous, Blinking, Audible Tone)
REPLACE OVERLAY (Potential Code: Continuous, Blinking, Audible Tone)
NOTE: See the table on the following page for specific error code messages and required action.
Error codes will automatically be cleared once the problem is resolved and operation is resumed by
touching the “START / STOP” key. In the event that proper function cannot be resumed,
please contact the manufacturer.
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Information
Center
Low Medium High
CYCLE SPEED
Low Medium
High
FIRMNESS
Information
Center area
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Error code will
illuminate here
Replace Overlay
Check Connections
Service Unit
19
DOC# R01-0006-00004-AA
“START/STOP” key