15
4 Operating the Dabir System
Powering Pneumatic Controller “ON”
1.
Plug the Pneumatic Controller Power Cord into an acceptable wall power outlet.
CAUTION:
To ensure proper device grounding, do not use an extension cord with
this device. The Power Cord should be plugged directly into an acceptable
wall power outlet.
2.
Power Pneumatic Controller “ON” by depressing Main Toggle Switch. (see images below).
CAUTION:
Ensure Power Cord is clear of movable bed parts and placed to
avoid a trip hazard or possible entrapment.
CAUTION:
Power “OFF” or “STOP” the Pneumatic Controller for cardiac arrest events.
The unit is not intended for use during CPR.
Main Toggle
Switch
Power
Cord
Hose Assembly
Connector (Male)
Data Port
(Factory Use Only)
DOC# R01-0006-00004-AA
Summary of Contents for DabirAIR CA-1001
Page 32: ...DOC R01 0006 00004 AA...
