Dabir Surfaces DabirAIR CA-1001, Instructions For Use Manual

Page: 17 / 32

17
5.2 Setting Overlay Firmness
1. The Pneumatic Control Unit User Interface is equipped with three (3) different firmness settings:
LOW (Default Setting)
MEDIUM
HIGH
2. Manually adjust comfort by touching the desired firmness option on the
User Interface (see images below).
NOTE: Microclimate Overlays will only have one firmness setting. The LOW, MEDIUM and HIGH User
Interface buttons all provide a “LOW” firmness when a Microclimate Overlay is connected.
NOTE: The Dabir Pneumatic Controller utilizes touch activated controls for added reliability,
improved product durability and easier cleaning. Use of thick gloves may impact performance when
operating the control.
3. Touch the “START/STOP” key to initiate alternating cycles.
NOTE: The cycle speed and firmness can be changed in mid-cycle by simply touching the key for the
desired setting.
CAUTION:
To avoid bottoming out on the Overlay, the “MED” or “HIGH” firmness settings
are recommended for patients with greater BMI.
CAUTION: To avoid bottoming out on the Overlay, a “MED” or “HIGH” firmness
setting is recommended when utilizing firmer base support surfaces, mattresses or pads.
High Setting
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Low Setting
Information
Center
Low
Medium High
CYCLE SPEED
Low
Medium High
FIRMNESS
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Medium Setting
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Information
Center
Low Medium High
CYCLE SPEED
Low Medium High
FIRMNESS
Firmness Control keys
“START/STOP” key
DOC# R01-0006-00004-AA