D-Link xStack DWS-3200 Series, Cli Manual

Page: 541 / 581

Wireless AP Radio Commands
power
Page 538
power
The power AP Interface Radio Configuration mode command configures the power level. To restore the default
configuration, use the no form of this command.
Syntax
power { max | half | quarter | eighth | min }
no power
Parameters
•
max — Maximum power.
•
half — Half of the maximum power.
•
quarter — Quarter of the maximum power.
•
eighth — Eighth of the maximum power.
•
min — Minimum power.
Default Configuration
Maximum power.
Command Mode
AP Interface Radio Configuration mode
User Guidelines
•
The maximum power depends on the country code that was set by the wlan country-code Global
Configuration command.
•
The power is off if the wlan tx-power off Global Configuration command was activated.
Example
The following example configures the power level to half the maximum power.
Console (Config-wlan-ap)# interface radio 802.11g
Console (Config-wlan-ap-radio)# power half