D-Link xStack DWS-3200 Series Page 482 Cli Manual Download

Page: 482 / 581

DXS/DWS-3200 series CLI Reference Guide

Page 479

data-rates

The

data-rates

BSS Configuration mode command configures the data rates used in a BSS. To restore defaults,

use the

form of this command.

Syntax

data-rates

{[

mandatory

]

add

remove

}

rate1

[

rate1

…

]

no data-rates

The command can be implemented as follows:

data-rates mandatory add

rate1

[

rate1…12

]

data-rates

{

add

remove

}

rate1

[

rate1…12

]

Parameters
•

rate-list

— Specifies the data rates that should be supported. Available rates are as follows:

–

802.11g — 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54.

–

802.11a — 6, 9, 12, 18, 24, 36, 48 and 54.

Default Configuration

All rates are optional except for the following rates that are mandatory:

•

802.11g: 1.

•

802.11a: 6.

Command Mode

BSS Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the data rates used in a BSS to 2 while complying with 802.11g.

Console (Config-ap-radio)#

bss configure

enterprise

Console (Config-wlan-ap-radio-bss-if)#

data-rates mandatory

add

Summary of Contents for xStack DWS-3200 Series





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Related manuals for xStack DWS-3200 Series

Brands by name

Popular brands

D-Link xStack DWS-3200 Series, Cli Manual

Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Related manuals for xStack DWS-3200 Series

Brands by name

Popular brands