D-Link xStack DWS-3200 Series, Cli Manual

Page: 530 / 581

DXS/DWS-3200 series CLI Reference Guide
Page 527
timer (Security-Suite ESS)
The timer Security-Suite ESS Configuration mode command configures the key exchange timers for a Security-
Suite. To restore the default configuration, use the no form of this command.
Syntax
timer rekey-time-unicast { never | minutes }
no timer rekey-time-unicast
timer rekey-time-multicast { never | minutes }
no timer rekey-time-multicast
timer reauth-time { never | seconds }
no timer reauth-time
timer idle-time { never | seconds }
no timer idle-time
Parameters
•
rekey-time-unicast minutes — Unicast rekeying timeout period. (Range: 1-4294967295)
•
rekey-time-multicast minutes — Multicast rekeying timeout period. (Range: 1-4294967295)
•
reauth-time seconds — Re-authentication timeout period. (Range: 1-4294967295)
•
idle-time seconds — DLE timeout period. (Range: 1-9676800)
•
never — There is an unlimited rekeying timeout period.
Default Configuration
•
rekey-time-unicast — Never
•
rekey-time-multicast — Never
•
reauth-time — 14400
•
idle-time — Never
Command Mode
Security-Suite ESS Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the key exchange timers for a security-suite as an unlimited rekeying timeout
period.
Console (Config-wlan-ess)# security suite configure wpa
Console (Config-ess-security)# timer rekey-time-unicast never