D-Link xStack DWS-3200 Series, Cli Manual

Page: 485 / 581

Wireless AP General Commands
wlan ap key
Page 482
wlan ap key
The wlan ap key Global Configuration mode command configures a secure key for communication to an AP. To
remove an AP, use the no form of the command.
Syntax
wlan ap { name | mac-address } key { hex hex-number | ascii string }
no wlan ap {name | mac-address} key
Parameters
•
name — The AP name. The AP name can be specified only for active APs. (Range: 1-16 characters)
•
mac-address — The AP MAC address.
•
hex hex-number — The secure key in hexadecimal format. 32 hexadecimal characters must be entered.
•
ascii string — The secure key in hexadecimal format. From 1-16 characters can be entered. If less than 16
characters are entered, the software completes the key to 16 characters with blank characters.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
•
If the secure key is not set before activation at the AP, that key would be transferred to the AP on activation.
•
A key cannot be removed in an active AP.
Example
The following example configures a secure key for communication to an AP called ‘enterprise’.
Console (config)# wlan ap enterprise key ascii 1234567