D-Link xStack DWS-3200 Series Cli Manual Download Page 110

Page: 110 / 581

DXS/DWS-3200 series CLI Reference Guide

Page 107

mdix

The

mdix

Interface Configuration (Ethernet) mode command enables cable crossover on a given interface.

To disable cable crossover, use the

form of this command.

Syntax

mdix {on | auto}

no mdix

Parameters
•

— Manual mdix is enabled.

•

auto

— Automatic mdi/mdix is enabled.

Default Configuration

The default setting is

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

Auto:

All possibilities to connect a PC with cross or normal cables are supported and are automatically detected.

: It is possible to connect to a PC only with a normal cable and to connect to another device only with a cross

cable.

: It is possible to connect to a PC only with a cross cable and to connect to another device only with a normal

cable.

Example

In the following example, automatic crossover is enabled on port 1.

Console(config)#

interface ethernet

Console(config-if)#

mdix

auto

Summary of Contents for xStack DWS-3200 Series





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Brands by name

Popular brands

D-Link xStack DWS-3200 Series, Cli Manual

Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Brands by name

Popular brands