D-Link xStack DWS-3200 Series, Cli Manual

Page: 375 / 581

System Management Commands
telnet
Page 372
A sample of this list follows. Note that the Ctrl-shift-6 sequence appears as ^^ on the screen.
Several concurrent Telnet sessions can be opened and switched. To open a subsequent session, the current
connection has to be suspended by pressing the escape sequence keys (Ctrl-shift-6) and x to return to the system
command prompt. Then open a new connection with the
telnet User EXEC mode command.
Keywords Table
Ports Table
Console> ‘Ctrl-shift-6’ ?
[Special telnet escape help]
^^ B sends telnet BREAK
^^ C sends telnet IP
^^ H sends telnet EC
^^ O sends telnet AO
^^ T sends telnet AYT
^^ U sends telnet EL
Ctrl-shift-6 x suspends the session (return to system command prompt)
O p t i o n s D e s c r i p t i o n
/echo Enables local echo.
/quiet Prevents onscreen display of all messages from the software.
/source-interface Specifies the source interface.
/stream Turns on stream processing, which enables a raw TCP stream with no Telnet
control sequences. A stream connection does not process Telnet options and
can be appropriate for connections to ports running UNIX-to-UNIX Copy
Program (UUCP) and other non-Telnet protocols.
Ctrl-shift-6 x Return to System Command Prompt
K e y w o r d D e s c r i p t i o n P o r t N u m b e r
BGP Border Gateway Protocol 179
chargen Character generator 19
cmd Remote commands 514
daytime Daytime 13
discard Discard 9
domain Domain Name Service 53
echo Echo 7
exec Exec 512
finger Finger 79
ftp File Transfer Protocol 21
ftp-data FTP data connections 20
gopher Gopher 70