D-Link xStack DWS-3200 Series Page 288 Cli Manual Download

Page: 288 / 581

DXS/DWS-3200 series CLI Reference Guide

Page 285

snmp-server host

The

snmp-server host

Global Configuration mode command specifies the recipient of Simple Network

Management Protocol Version 1 or Version 2 notifications. To remove the specified host, use the

form of this

command.

Syntax

snmp-server host

{

ip-address | hostname

}

community-string

[

traps | informs

] [

1 | 2

] [

udp-port port

] [

filter

filtername

] [

timeout seconds

] [

retries retries

]

no snmp-server host

{

ip-address | hostname

} [

traps | informs

]

Parameters
•

ip-address

— Specifies the IP address of the host (targeted recipient).

•

hostname

— Specifies the name of the host. (Range:1-158 characters)

•

community-string

— Specifies a password-like community string sent with the notification operation.

(Range: 1-20)

•

traps

— Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are sent to the host.

•

informs

— Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1.

•

— Indicates that SNMPv1 traps will be used.

•

— Indicates that SNMPv2 traps will be used. If

•

port

—Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162.

(Range:1-65535)

•

filtername

— Specifies a string that defines the filter for this host. If unspecified, nothing is filtered.

(Range: 1-30 characters)

•

seconds

— Specifies the number of seconds to wait for an acknowledgment before resending informs. If

unspecified, the default timeout period is 15 seconds. (Range: 1-300)

•

retries — Specifies the maximum number of times to resend an inform request. If unspecified, the default

maximum number of retries is 3. (Range: 0-255)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient is
automatically generated for all the MIB.

When configuring an SNMPv1 notification recipient, the

Inform

option cannot be selected.

If a trap and inform are defined on the same target, and an inform was sent, the trap is not sent.

Summary of Contents for xStack DWS-3200 Series





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Related manuals for xStack DWS-3200 Series

Brands by name

Popular brands

D-Link xStack DWS-3200 Series, Cli Manual

Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Related manuals for xStack DWS-3200 Series

Brands by name

Popular brands