manualshive.com logo in svg

D-Link xStack DWS-3200 Series, Cli Manual

Share
Download
D-Link xStack DWS-3200 Series Cli Manual Download Page 409

User Interface Commands

help

Page 406 

help

The 

help

 command displays a brief description of the help system.

Syntax

help

Default Configuration

This command has no default configuration.

Command Mode

All command modes

User Guidelines

There are no user guidelines for this command.

Example

The following example describes the help system

.

Console# 

help

Help may be requested at any point in a command by entering a question mark '?'. If nothing 

matches the currently entered incomplete command, the help list is empty. This indicates 

that for a query at this point, there is no command matching the current input. If the 

request is within a command, enter backspace and erase the entered characters to a point 

where the request results in a display.

Help is provided when:

1. There is a valid command and a help request is made for entering a parameter or argument 

(e.g. 'show ?'). All possible parameters or arguments for the entered command are 

displayed.

2. An abbreviated argument is entered and a help request is made for arguments matching the 

input (e.g. 'show pr?').

Summary of Contents for xStack DWS-3200 Series






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands