manualshive.com logo in svg

D-Link xStack DWS-3200 Series, Cli Manual

Share
Download
D-Link xStack DWS-3200 Series Cli Manual Download Page 248

DXS/DWS-3200 series CLI Reference Guide

Page 245 

security-suite enable

The 

security-suite enable

 Global Configuration mode command enables the security suite feature. Use the 

no

 

form of this command to disable the security suite feature.

Syntax

security-suite enable

 [

global-rules-only

]

no security-suite enable

Parameters
•

global-rules-only

 — Specifies that all the security suites commands would be only global commands. This 

setting saves space in the Ternary Content Addressable Memory (TCAM). 

Default Configuration

No protection is configured.

Command Mode

Global Configuration mode

User Guidelines

MAC ACLs should be removed before the security-suite is enabled. The rules can be reentered after the security-
suite is enabled.

If ACLs or policy maps are assigned on ports, per interface security-suite rules cannot be enabled.

Example

The following example enables the security suite feature and specifies that all the security suites commands 
would be only global commands.

Console(config)# 

security-suite enable

 

global-rules-only

Summary of Contents for xStack DWS-3200 Series






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands