D-Link xStack DWS-3200 Series Page 237 Cli Manual Download

Page: 237 / 581

QoS Commands

traffic-shape

Page 234

traffic-shape

The

traffic-shape

Interface Configuration (Ethernet, port-channel) mode command configures the shaper of the

egress port/queue. To disable the shaper, use the

form of this command.

Syntax

traffic-shape

{

committed-rate committed-burst

} [

queue-id

]

no traffic-shape

[

queue-id

]

Parameters
•

committed-rate

— Specifies the average traffic rate (CIR) in bits per second (bps).

(Range: 6510-1073741800)

•

excess-burst

— Specifies the excess burst size (CBS) in bytes.

•

queue-id

— Specifies the queue number to which the shaper is assigned.

Default Configuration

No shape is defined.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

This command activates the shaper on a specified egress port or egress queue.

To activate the shaper on an egress port, enter the Interface Configuration mode and specify the port number.
Then run this command without the

queue-id

parameter. The CIR and the CBS will be applied to the specified

port.

To activate the shaper for specific queue, run this command with the

queue-id

parameter.

Example

The following example sets a shaper on Ethernet port 1/5 when the average traffic rate exceeds 124000 bps or the
normal burst size exceeds 96000 bps.

Console(config)#

interface ethernet

1/5

Console(config-if)

traffic-shape

124000 96000

Summary of Contents for xStack DWS-3200 Series





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Related manuals for xStack DWS-3200 Series

Brands by name

Popular brands

D-Link xStack DWS-3200 Series, Cli Manual

Search results

Summary of Contents for xStack DWS-3200 Series

Reviews:

Related manuals for xStack DWS-3200 Series

Brands by name

Popular brands