manualshive.com logo in svg

D-Link xStack DGS-3612G series, Instruction Manual

The D-Link xStack DGS-3612G series is a high-performance switch designed for seamless network management. With advanced specifications and reliable performance, this product allows for efficient data transmission. Available for free download, the user manual can be found on our website, ensuring seamless setup and operation.

Share
Download
background image

xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

DGS-3612G:4#config greeting_message 
Command: config greeting_message 
 
Greeting Messages Editor 
=============================================================================== 
                                               DGS-3612G Gigabit Ethernet Switch  
                                                        Command Line Interface 
 
                                                        Firmware: Build 1.00.B62 
                           Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.                      
=============================================================================== 
 
   <Function Key>                                                      <Control Key> 
   Ctrl+C     Quit without save                                   left/right/ 
   Ctrl+W     Save and quit                                        up/down       Move cursor 
                                                                                   Ctrl+D           Delete line 
                                                                                   Ctrl+X        Erase all setting 
                                                                                   Ctrl+L        Reload original setting 
------------------------------------------------------------------------------------------------------------------------------------------ 
 
Success. 
 
DGS-3612G:4# 

 
 

show greeting_message 

Purpose 

Used to view the currently configured greeting message configured on 
the Switch. 

Syntax 

show greeting_message 

Description 

This command is used to view the currently configured greeting 
message on the Switch. 

Parameters None. 

Restrictions None. 

Example usage: 
 

To view the currently configured greeting message: 

DGS-3612G:4#show greeting_message 
Command: show greeting_message 
 
========================================================================= 
                                                DGS-3612G Gigabit Ethernet Switch  
                                                        Command Line Interface 
 
                                                        Firmware: Build 1.00.B62 
                           Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.                      
========================================================================= 
 
Success. 
 
DGS-3612G:4# 

 

 

 

 

 

 

20

Summary of Contents for xStack DGS-3612G series







































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3612G series

Barracuda Networks Network Quick Start Manual preview
Network
Brand: Barracuda Networks Pages: 2
Parker H Series Installation & Service Instructions Manual preview
H Series
Brand: Parker Pages: 344
LaCie 8BIG RACK THUNDERBOLT 2 Quick Start Manual preview
8BIG RACK THUNDERBOLT 2
Brand: LaCie Pages: 28
XAVI Technologies Corp. 7721r User Manual preview
7721r
Brand: XAVI Technologies Corp. Pages: 71
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Brand: TFortis Pages: 86
Ensemble Designs Avenue Express Control Panel Data Pack preview
Avenue Express Control Panel
Brand: Ensemble Designs Pages: 19
SMC Networks Barricade SMC7901WBRA2 Installation Manual preview
Barricade SMC7901WBRA2
Brand: SMC Networks Pages: 2
8level IPG-200 User Manual preview
IPG-200
Brand: 8level Pages: 52
Solwise 3GWIFIMRD User Manual preview
3GWIFIMRD
Brand: Solwise Pages: 231
Unex EVK-351 Quick Start Manual preview
EVK-351
Brand: Unex Pages: 27
Dahua NVR41-4KS2 Series User Manual preview
NVR41-4KS2 Series
Brand: Dahua Pages: 452
M-system M5XSBS Instruction Manual preview
M5XSBS
Brand: M-system Pages: 4
Kramer VS-162AVM User Manual preview
VS-162AVM
Brand: Kramer Pages: 56
Kasda KE318EU User Manual preview
KE318EU
Brand: Kasda Pages: 39
Goobay 93122 User Manual preview
93122
Brand: Goobay Pages: 20
ZyXEL Communications GS-2724 User Manual preview
GS-2724
Brand: ZyXEL Communications Pages: 348
Genexis FiberTwist XGS2410 Installation Manual preview
FiberTwist XGS2410
Brand: Genexis Pages: 7
LanReady AP-952X User Manual preview
AP-952X
Brand: LanReady Pages: 40

Brands by name

Popular brands

Load more brands