xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#config stp instance_id 2 add_vlan 10
Command : config stp instance_id 2 add_vlan 10
Success.
DGS-3612G:4#
Example usage:
To remove VID 10 from instance ID 2:
DGS-3612G:4#config stp instance_id 2 remove_vlan 10
Command : config stp instance_id 2 remove_vlan 10
Success.
DGS-3612G:4#
delete stp instance_id
Purpose
Used to delete a STP instance ID from the Switch.
Syntax
delete stp instance_id <value 1-15>
Description
This command allows the user to delete a previously configured STP
instance ID from the Switch.
Parameters
<value 1-15> -
Enter a value between 1 and 15 to identify the Spanning
Tree instance on the Switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete STP instance ID 2 from the Switch.
DGS-3612G:4#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DGS-3612G:4#
config stp priority
Purpose
Used to update the STP instance configuration.
Syntax
config stp priority <value 0-61440> instance_id <value 0-15>
Description
This command is used to update the STP instance configuration settings
on the Switch. The MSTP will utilize the priority in selecting the root
bridge, root port and designated port. Assigning higher priorities to STP
regions will instruct the Switch to give precedence to the selected
instance_id
for forwarding packets. The lower the priority value set, the
higher the priority.
Parameters
priority <value 0-61440>
- Select a value between 0 and 61440 to
specify the priority for a specified instance id for forwarding packets. The
lower the value, the higher the priority. This entry must be divisible by
4096.
instance_id <value 0-15>
- Enter the value corresponding to the
previously configured instance ID for which to set the priority value. An
instance id of
0
denotes the default
instance_id
(CIST) internally set on
the Switch.
77
