xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
create iproute default
Purpose
Used to create IP route entries to the Switch’s IP routing table.
Syntax
create iproute default <ipaddr> {<metric>}
This command is used to create a default static IP route entry to the
Switch’s IP routing table.
<ipaddr>
−
The gateway IP address for the next hop router.
<metric>
−
Allows the entry of a routing protocol metric entry representing
the number of routers between the Switch and the IP address above. The
default setting is 1.
Restrictions Only
administrator-level users can issue this command.
Description
Parameters
Example Usage:
To add the default static address 10.48.74.121, with a metric setting of 1, to the routing table:
DGS-3612G:4#create iproute default 10.48.74.121 1
Command: create iproute default 10.48.74.121 1
Success.
DGS-3612G:4#
delete iproute
Purpose
Used to delete an IP route entry from the Switch’s IP routing table.
Syntax
delete iproute <network_address> <ipaddr> [primary | backup]
Description
This command will delete an existing entry from the Switch’s IP routing
table.
Parameters
<network_address>
−
IP address and netmask of the IP interface that is
the destination of the route. The address and mask information can be
specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in
CIDR format, 10.1.2.3/8).
<ipaddr>
−
The gateway IP address for the next hop router.
[
primary | backup]
−
The user may choose between Primary and Backup.
If the Primary Static/Default Route fails, the Backup Route will support the
entry. Please take note that the Primary and Backup entries cannot have
the same Gateway.
Only
administrator-level users can issue this command.
Restrictions
Example usage:
To delete a backup static address 10.48.75.121, mask 255.0.0.0 and gateway (ipaddr) entry of 10.1.1.254 from the routing
table:
DGS-3612G:4#delete iproute 10.48.74.121/8 10.1.1.254
Command: delete iproute 10.48.74.121/8 10.1.1.254
Success.
DGS-3612G:4#
222
