manualshive.com logo in svg

D-Link xStack DGS-3612G series, Instruction Manual

The D-Link xStack DGS-3612G series is a high-performance switch designed for seamless network management. With advanced specifications and reliable performance, this product allows for efficient data transmission. Available for free download, the user manual can be found on our website, ensuring seamless setup and operation.

Share
Download
background image

xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

DGS-3612G:4# create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0 
destination_ip_mask 10.0.0.0 dscp icmp type code 
Command: create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0 
destination_ip_mask 10.0.0.0 dscp icmp type code 
 
Success. 
 
DGS-3612G:4# 

 

delete cpu access_profile 

Purpose 

Used to delete a previously created CPU access profile. 

Syntax 

delete cpu access_profile profile_id <value 1-5> 

Description The 

delete cpu access_profile 

command is used to delete a previously created 

cpu access profile. 

Parameters 

profile_id <value 1-5>

 

−

 Enter an integer between 1 and 5 that is used to identify 

the CPU access profile to be deleted with this command. This value is assigned to 
the access profile when it is created with the 

create cpu access_profile 

command.

Restrictions Only 

administrator-level users can issue this command. 

Example usage: 

To delete the CPU access profile with a profile ID of 1: 

DGS-3612G:4#delete cpu access_profile profile_id 1 
Command: delete cpu access_profile profile_id 1 
 
Success. 
 
DGS-3612G:4# 

 

config cpu access_profile 

Purpose 

Used to configure a CPU access profile used for CPU Interface Filtering and to define 
specific values that will be used to by the Switch to determine if a given packet should be 
forwarded or filtered. Masks entered using the 

create cpu access_profile 

command will be 

combined, using a logical AND operational method, with the values the Switch finds in the 
specified frame header fields. Specific values for the rules are entered using the 

config cpu 

access_profile

 command, below. 

Syntax 

config cpu access_profile profile_id <value 1-5> [add access_id <value 1-100> 
[ethernet {vlan <vlan_name 32> | source_mac <macaddr> | destination_mac 
<macaddr> | 802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff>} port [<portlist> | all] | 
ip {vlan vlan_name 32> | source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value 0-
63> | [icmp {type <value 0-255> | code <value 0-255>} | igmp {type <value 0-255>} | tcp 
{src_port <value 0-65535> | dst_port <value 0-65535> | flag [all | {urg | ack | psh | rst | 
syn | fin}]} | udp {src_port <value 0-65535> | dst_port <value 0-65535>} | protocol_id 
<value 0 - 255> {user_define <hex 0x0-0xffffffff>}]} port [<portlist> | all] [permit | deny] | 
packet_content {offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> 
<hex 0x0-0xffffffff> | offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> 
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff> 
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>} port [<portlist> | all] [permit 
| deny]]

 

{time_range <range_name 32>} | delete access_id <value 1-100>] 

Description The 

config cpu access_profile 

command is used to configure a CPU access profile for 

CPU Interface Filtering and to enter specific values that will be combined, using a logical 

 

189

Summary of Contents for xStack DGS-3612G series







































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3612G series

Ubiquiti NanoBeam M5 Setup preview
NanoBeam M5
Brand: Ubiquiti Pages: 3
Winext GW5000A Manual preview
GW5000A
Brand: Winext Pages: 37
NEC P401-TMX4D User Manual preview
P401-TMX4D
Brand: NEC Pages: 2
Garderos R-7700 Series Operating Manual preview
R-7700 Series
Brand: Garderos Pages: 23
iBall Baton 150m Configuration Manual preview
150m
Brand: iBall Baton Pages: 9
RuggedCom RUGGEDMAX WIN7000 Installation Manual preview
RUGGEDMAX WIN7000
Brand: RuggedCom Pages: 42
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
Juniper NFX250 Quick Start Manual preview
NFX250
Brand: Juniper Pages: 7
Maipu MP2900-04-AC Installation Manual preview
MP2900-04-AC
Brand: Maipu Pages: 80
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Brand: Freund Pages: 6
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
MSNswitch UIS-322b Quick Installation Manual preview
UIS-322b
Brand: MSNswitch Pages: 2
Icy Box IB-NAS5520 Quick Start Manual preview
IB-NAS5520
Brand: Icy Box Pages: 2
LevelOne WAB-3000 How To Set Up preview
WAB-3000
Brand: LevelOne Pages: 11
TP-Link Archer C7 How To Set Up preview
Archer C7
Brand: TP-Link Pages: 4
ActionTec GE344000-01 User Manual preview
GE344000-01
Brand: ActionTec Pages: 87
Orcon Netcom NB6 Installation preview
Netcom NB6
Brand: Orcon Pages: 2

Brands by name

Popular brands

Load more brands