xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config link_aggregation algorithm
Purpose
Used to configure the link aggregation algorithm.
Syntax
config link_aggregation algorithm [mac_source | mac_destination |
mac_source_dest | ip_source | ip_destination | ip_source_dest]
Description
This command configures the part of the packet examined by the Switch
when selecting the egress port for transmitting load-sharing data. This
feature is only available using the address-based load-sharing algorithm.
Parameters
mac_source
−
Indicates that the Switch should examine the source MAC
address.
mac_destination
−
Indicates that the Switch should examine the
destination MAC address.
mac_source_dest
−
Indicates that the Switch should examine the source
and destination MAC addresses
ip_source
−
Indicates that the Switch should examine the source IP
address.
ip_destination
−
Indicates that the Switch should examine the destination
IP address.
ip_source_dest
−
Indicates that the Switch should examine the source
and the destination IP address.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure link aggregation algorithm for mac-source-dest:
DGS-3612G:4#config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
DGS-3612G:4#
show link_aggregation
Purpose
Used to display the current link aggregation configuration on the Switch.
Syntax
show link_aggregation {group_id <value 1-32> | algorithm}
Description
This command will display the current link aggregation configuration of
the Switch.
Parameters
<value 1-32>
−
Specifies the group ID. The Switch allows up to 32 link
aggregation groups to be configured. The group number identifies each
of the groups.
algorithm
−
Allows you to specify the display of link aggregation by the
algorithm in use by that group.
Restrictions None.
Example usage:
To display Link Aggregation configuration:
118
