xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
show 802.1x auth_state
Purpose
Used to display the current authentication state of the 802.1x server on the
Switch.
Syntax
show 802.1x auth_state {ports [<portlist> | all]}
Description The
show 802.1x auth_state
command is used to display the current
authentication state of the 802.1x Port-based or MAC-based Network
Access Control server application on the Switch.
Parameters
ports <portlist>
−
Specifies a port or range of ports to be viewed.
all
– Specify to view all ports.
The following details what is displayed:
Port number
−
Shows the physical port number on the Switch.
Auth PAE State: Initialize / Disconnected / Connecting / Authenticating /
Authenticated / Held / ForceAuth / ForceUnauth
−
Shows the current state
of the Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initialize / Success /
Timeout
−
Shows the current state of the Backend Authenticator.
Port Status: Authorized / Unauthorized
−
Shows the result of the
authentication process. Authorized means that the user was
authenticated, and can access the network. Unauthorized means that the
user was not authenticated, and cannot access the network.
Restrictions None.
Example usage:
To display the 802.1x auth state for Port-based 802.1x:
DGS-3612G:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port Auth PAE State Backend State Port Status
------ ----------------------- --------------------- -----------------
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
3 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
6 ForceAuth Success Authorized
7 ForceAuth Success Authorized
8 ForceAuth Success Authorized
9 ForceAuth Success Authorized
10 ForceAuth Success Authorized
11 ForceAuth Success Authorized
12 ForceAuth Success Authorized
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
Example usage:
To display the 802.1x auth state for MAC-based 802.1x:
163
