manualshive.com logo in svg

D-Link xStack DGS-3612G series, Instruction Manual

The D-Link xStack DGS-3612G series is a high-performance switch designed for seamless network management. With advanced specifications and reliable performance, this product allows for efficient data transmission. Available for free download, the user manual can be found on our website, ensuring seamless setup and operation.

Share
Download
background image

xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual

 

config cpu access_profile 

AND operational method, with masks entered with the 

create cpu access_profile 

command, above. 

Parameters 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

profile_id <value 1-5>

 

−

 Enter an integer used to identify the access profile that will be 

configured with this command. This value is assigned to the access profile when it is created 
with the

 create access_profile 

command. The profile ID sets the relative priority for the 

profile and specifies an index number that will identify the access profile being created with 
this command. Priority is set relative to other profiles where the lowest profile ID has the 
highest priority.

 

ethernet

 

−

 Specifies that the Switch will look only into the layer 2 part of each packet. 

ip

 

−

 Specifies that the Switch will examine the IP fields in each packet. 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

add access_id <value 1-100>

 

−

 Adds an additional rule to the above specified 

access profile. The value is used to index the rule created.

 

vlan <vlan_name 32>

 

−

 Specifies that the access profile will apply to only to this 

VLAN. 

source_mac <macaddr>

 

−

 Specifies that the access profile will apply to this source 

MAC address. 

destination_mac <macaddr>

 

−

 Specifies that the access profile will apply to this 

destination MAC address.

 

ethernet_type <hex 0x0-0xffff> 

−

 Specifies that the access profile will apply only to 

packets with this hexadecimal 802.1Q Ethernet type value in the packet header.

 

vlan <vlan_name 32>

  

−

 Specifies that the access profile will apply to only this 

VLAN. 

source_ip <ipaddr>

 

−

 Specifies that the access profile will apply to only packets 

with this source IP address. 

destination_ip <ipaddr>

 

−

 Specifies that the access profile will apply to only 

packets with this destination IP address. 

dscp <value 0-63> 

−

 Specifies that the access profile will apply only to packets that 

have this value in their Type-of-Service (DiffServ code point, DSCP) field in their IP 
packet header 

icmp

 

−

 Specifies that the Switch will examine the Internet Control Message 

Protocol (ICMP) field within each packet.   

• 

type <value 0-255> 

−

 Specifies that the access profile will apply to this ICMP 

type value. 

• 

code <value 0-255> 

−

 Specifies that the access profile will apply to this ICMP 

code. 

igmp 

−

 Specifies that the Switch will examine the Internet Group Management 

Protocol (IGMP) field within each packet. 

type <value 0-255>

 

−

 Specifies that the access profile will apply to packets 

that have this IGMP type value. 

tcp

 

−

 Specifies that the Switch will examine the Transmission Control Protocol 

(TCP) field within each packet. 

src_port <value 0-65535>

 

−

 Specifies that the access profile will apply only 

to  packets that have this TCP source port in their TCP header. 

dst_port <value 0-65535> 

−

 Specifies that the access profile will apply only 

to packets that have this TCP destination port in their TCP header. 

udp

 

−

 Specifies that the Switch will examine the User Datagram Protocol (UDP) 

field within each packet. 

src_port <value 0-65535>

 

−

 Specifies that the access profile will apply only 

to packets that have this UDP source port in their header.   

dst_port <value 0-65535>

 

−

 Specifies that the access profile will apply only 

to packets that have this UDP destination port in their header.

   

protocol_id <value 0-255>

 

−

 Specifies that the Switch will examine the protocol 

field in each packet and if this field contains the value entered here, apply the 

 

190

Summary of Contents for xStack DGS-3612G series







































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3612G series

TDC Netopia User Manual preview
Netopia
Brand: TDC Pages: 27
Sun Microsystems Ray 3 Plus Client Getting Started Manual preview
Ray 3 Plus Client
Brand: Sun Microsystems Pages: 6
Raritan DOMINION SX - Quick Setup Manual preview
DOMINION SX -
Brand: Raritan Pages: 4
Zhone 6211 Product Manual preview
6211
Brand: Zhone Pages: 7
Zhone 6211 Quick Installation Instructions preview
6211
Brand: Zhone Pages: 1
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Brand: ADTRAN Pages: 2
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Brand: Paradyne Pages: 112
Cambium Networks PMP 450 Series User Manual preview
PMP 450 Series
Brand: Cambium Networks Pages: 215
Lorex LNR100 SERIES Instruction Manual preview
LNR100 SERIES
Brand: Lorex Pages: 186
Ruckus Wireless MediaFlex NG Quick Installation Manual preview
MediaFlex NG
Brand: Ruckus Wireless Pages: 2
Rosewill RNX-N150RT Quick Installation Manual preview
RNX-N150RT
Brand: Rosewill Pages: 10
THOMSON SpeedTouch 605 User Manual preview
SpeedTouch 605
Brand: THOMSON Pages: 212
Caen A 1735 Technical Information Manual preview
A 1735
Brand: Caen Pages: 14
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Brand: Ubiquiti Pages: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Brand: CG Pages: 112
Intel IXP45X Developer'S Manual preview
IXP45X
Brand: Intel Pages: 958
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
B&B Electronics Elinx EIR508 Series Quick Start Manual preview
Elinx EIR508 Series
Brand: B&B Electronics Pages: 2

Brands by name

Popular brands

Load more brands