xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config stp priority
Restrictions Only
administrator-level users can issue this command.
Example usage:
To set the priority value for
instance_id
2 as 4096:
DGS-3612G:4#config stp priority 4096 instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
DGS-3612G:4#
config stp mst_config_id
Purpose
Used to update the MSTP configuration identification.
Syntax
config stp mst_config_id {revision_level <int 0-65535> | name
<string>}
Description
This command will uniquely identify the MSTP configuration currently
configured on the Switch. Information entered here will be attached to
BPDU packets as an identifier for the MSTP region to which it belongs.
Switches having the same
revision_level
and
name
will be considered as
part of the same MSTP region.
Parameters
revision_level <int 0-65535>
– Enter a number between 0 and 65535 to
identify the MSTP region. This value, along with the name will identify
the MSTP region configured on the Switch. The default setting is
0
.
name <string>
- Enter an alphanumeric string of up to 32 characters to
uniquely identify the MSTP region on the Switch. This
name
, along with
the
revision_level
value will identify the MSTP region configured on the
Switch. If no
name
is entered, the default name will be the MAC address
of the device.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the MSTP region of the Switch with
revision_level
10 and the
name
“Trinity”:
DGS-3612G:4#config stp mst_config_id revision_level 10 name Trinity
Command: config stp mst_config_id revision_level 10 name Trinity
Success.
DGS-3612G:4#
config stp mst_ports
Purpose
Used to update the port configuration for a MSTP instance.
Syntax
config stp mst_ports <portlist> instance_id <value 0-15>
{internalCost [auto | <value 1-200000000>] priority <value 0-240>}
Description
This command will update the port configuration for a STP
instance_id
. If
a loop occurs, the MSTP function will use the port priority to select an
interface to put into the forwarding state. Set a higher priority value for
interfaces to be selected for forwarding first. In instances where the
priority value is identical, the MSTP function will implement the lowest
port number into the forwarding state and other interfaces will be
78
