xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config dst
e_mth
- Configure the month in which DST ends.
s_time
– Configure the time of day to begin DST.
e_time
- Configure the time of day to end DST.
s_date
- Configure the specific date (day of the month) to begin DST.
e_date
- Configure the specific date (day of the month) to begin DST.
offset [30 | 60 | 90 | 120]
- Indicates number of minutes to add or to subtract
during the summertime. The possible offset times are 30,60,90,120. The
default value is 60
Restrictions Only
administrator-level users can issue this command.
<end_mth 1-12>
- The month to end DST expressed as a
number.
•
•
•
•
•
<start_time hh:mm>
- Time is expressed using a 24-hour clock, in
hours and minutes.
<end_time hh:mm>
- Time is expressed using a 24-hour clock, in
hours and minutes.
<start_date 1-31>
- The start date is expressed numerically.
<end_date 1-31>
- The end date is expressed numerically.
Example usage:
To configure daylight savings time on the Switch:
DGS-3612G:4#config dst repeating s_week 2 s_day tue s_mth 4
s_time 15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time
15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Success.
DGS-3612G:4#
show time
Purpose
Used to display the current time settings and status.
Syntax
show time
Description
This will display system time and date configuration as well as
display current system time.
Parameters None.
Restrictions None.
Example usage:
To show the time currently set on the Switch’s System clock:
199
