xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Sw itch
374
VLAN Status Port
This window allows the VLAN status for each of the Switch's ports to be viewed. To view settings for a particular port, enter the
port number and click
Find
.
To view this window, click
Monitoring
>
VLAN Status Port
, as shown below.
Figure 7 - 23 VLAN Status Port window
Port Access Control
The following screens are used to monitor 802.1X statistics of the Switch, on a per port basis. To view the
Port Access Control
windows, open the monitoring folder and click the
Port Access Control
folder. There are six windows to monitor.
NOTE:
The Authenticator State cannot be viewed on the Switch unless
802.1X is enabled by port or by MAC address. To enable 802.1X, go to
the DGS-3400 Web Management Tool window.
Authenticator State
The following section describes the 802.1X Authenticator State on the Switch. This window displays the Authenticator State for
individual ports on a selected device. In Port-based mode if one of the attached hosts is successfully authorized, all hosts on the
same port will be granted access to the network. If the port authorization fails, the specified port(s) will continue authenticating. In
Host-based mode each user can individually authenticate and access the network.
To view this window, click
Monitoring > Port Access Control > Authenticator State
, as shown below.
Figure 7 - 24 Authenticator State window
The user may also view this window if any port/host is authenticated.
Parameter Description
Port List
Enter the port list you wish to find. To view all ports tick the Select All Ports check box.