xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Sw itch
298
IPv6 Address
Click the radio button and enter the RADIUS IPv6 address.
Authentic UDP Port
(1-65535)
Set the RADIUS authentic server(s) UDP port. The default port is
1812
.
Accounting UDP Port
(1-65535)
Set the RADIUS account server(s) UDP port. The default port is
1813
.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Timeout (1-255)
Enter the timeout value in seconds (
1
to
255
). The default value is
5
.
Retransmit (1-20)
Set the count for retransmit(1 to 20).The default value is 2.
Status
This allows the user to set the RADIUS Server as
Valid
(Enabled) or
Invalid
(Disabled).
Click
Apply
to implement the changes.
802.1X User Settings
This window allows the user to set different local users on the Switch and set a global limitation on the maximum number of users
that can be learned via 802.1X authentication.
To view this window, click
Security
>
802.1X
>
802.1X User Settings
, as shown below.
Figure 6 - 28 802.1X User Setting window
This screen allows setting of the following features:
Parameter Description
Max User (1-4000)
Enter the maximum number of users to be allowed. Check the
No Limit
check box to specify
that there will be the maximum number of users. By default there is no limit.
User Name
Enter the User Name of the new profile to be created.
Password
Enter a password for the new user.
