D-Link xStack DGS-3427 Product Manual Download Page 111

Page: 111 / 424

xStack

DGS-3400 Series Layer 2 Gigabit Ethernet Managed Sw itch

102

– To specify that SNMP version 2 will be used.

V3-NoAuth-NoPriv

– To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv

security level.

V3-Auth-NoPriv

– To specify that the SNMP version 3 will be used, with an Auth-NoPriv

security level.

V3-Auth-Priv

– To specify that the SNMP version 3 will be used, with an Auth-Priv security

level.

Community String /
SNMP V3 User Name

Type in the community string or SNMP V3 user name as appropriate.

To implement your new settings, click

Apply

. To return to the SNMP Host Table window, click the

Show All SNMP Host Table

Entries

link.

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the
SNMP engine on the Switch.

To view this window, click

Administration > SNMP Manager > SNMP Engine ID

, as shown below.

Figure 2 - 124 SNMP Engine ID window

To change the Engine ID, enter the new Engine ID in the space provided and click the

Apply

button.

Trap Source Interface Settings

This window is used to configure the trap source interface settings.

To view this window, click

Administration > Trap Source Interface Settings

, as shown below.

Figure 2 - 125 Trap Source Interface Settings window

The following parameters can be configured:

Parameter Description

Interface Name

Enter a name of the interface.

IPv4 Address

Tick the check box and enter an IPv4 address.

Summary of Contents for xStack DGS-3427









































































































































































































































































































































































































































Search results

Summary of Contents for xStack DGS-3427

Reviews:

Related manuals for xStack DGS-3427

Brands by name

Popular brands

D-Link xStack DGS-3427, Product Manual

Search results

Summary of Contents for xStack DGS-3427

Reviews:

Related manuals for xStack DGS-3427

Brands by name

Popular brands