DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
210
Restrictions
You must have administrator privileges.
Examples
To configure the System IP interface:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g i p i f S y s t e m v l a n v 1
C o m m a n d : c o n f i g i p i f S y s t e m v l a n v 1
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
27-2 create ipif
Purpose
Used to create an IPv6 interface for IPv6 addresses.
Format
create ipif <ipif_name > {<network_address>} <vlan_name > {state [enable|disable]}
Description
This command creates an IP interface for IPv6 only.
This interface can only be configured with an IPv6 address. Because only one IPV6 interface is supported,
when the System interface already has some IPV6 addresses, executing this command will fail.
Note
: The Switch only supports one IP interface for IPV6 addresses.
Parameters
Parameters
Description
ipif_name
The name of the interface.
network_address
This parameter is not supported in the current release.
vlan_name
The name of the VLAN corresponding to the IP interface.
state
The state of the IP interface.
Restrictions
You must have administrator privileges.
Examples
To create an IP interface
