DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
92
8
Network Monitoring Command List
show packet ports <portlist>
show error ports <portlist>
show utilization [ports | cpu]
clear counters {ports <portlist> }
clear log
show log {index <value_list> }
enable syslog
disable syslog
show syslog
config syslog host [all|<index 1-4>] { severity [informational |warning |all ] |
facility [local0|local1|local2|local3|local4|local5|local6|local7] |
udp_port <udp_port_numer> |
ipaddress <ipaddr> |
state [enable|disable]}
create syslog host <index 1-4> {severity [informational|warning|all] | facility[local0|local1
|local2|local3|local4|local5|local6|local7] |udp_port <udp_port_number> | ipaddress <ipaddr>
| state [enable|disable]}
delete syslog host [<index 1-4> | all]
show syslog host {<index 1-4>}
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]
show log_save_timing
8-1 show packet ports
Purpose
Used to display statistics about the packets sent and received by the switch.
Format
show
packet
ports
<portlist>
Description
The
show packet ports
command displays statistics about the packets sent and received by the switch.
Parameters
Parameters
Description
portlist
Specifies a range of ports to be displayed.
