D-Link xStack DGS-3200 Series, Cli Manual

Page: 79 / 443

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
79
6-17 show snmp host
Purpose
Used to display the recipient for which the traps are targeted.
Format
show snmp host { <ipaddr> }
Description
The
show snmp host
command displays the recipient for which the traps are targeted.
Parameters
Parameters Description
ipaddr
The IP address of the recipient for which the traps are targeted.
If no parameter specified, all SNMP hosps will be diplayed.
v6host
Specifies the v6host IP address.
Restrictions
user level
Example
D G S - 3 2 0 0 - 1 0 : 4 # s h o w s n m p h o s t
C o m m a n d : s h o w s n m p h o s t
S N M P H o s t T a b l e
H o s t I P A d d r e s s S N M P V e r s i o n C o m m u n i t y N a m e / S N M P v 3 U s e r N a m e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 4 8 . 7 6 . 1 0 0 V 3 n o a u t h n o p r i v i n i t i a l
1 0 . 5 1 . 1 7 . 1 V 2 c p u b l i c
T o t a l E n t r i e s : 2
D G S - 3 2 0 0 - 1 0 : 4 #
6-18 show snmp v6host
Purpose
Used to display the recipient for which the traps are targeted.
Format
show snmp v6host { <ipv6addr> }