DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
260
profile_id
A profile to be added to or deleted from the port
permit
Specifies that the packet that match the addresses defined in the
profiles will be permitted. The default mode is permit.
deny
Specifies that the packet that match the addresses defined in the
profiles will be denied.
Restrictions
You must have administrator privileges.
Examples
To configure ports 1 and 3 to set the multicast address profile 2.
D G S - 3 2 0 0 - 1 0 : 4 # config limited_multicast_addr ports 1,3 add profile_id 2
C o m m a n d : config limited_multicast_addr ports 1,3 add profile_id 2
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
34-6 show limited multicast addr
Purpose
Used to show per-port Limited IP multicast address range.
Format
show limited_multicast_addr { ports <portlist> }
Description
The
show limited_multicast_addr
command allows you to show multicat address range by ports or by
VLANs.
When the function is configured on a port, it limits the multicast groups operated by the IGMP snooping
function and layer 3 function. When the function is configured on a VLAN, it limits the multicast groups
operated by the IGMP layer 3 function.
Parameters
Parameters
Description
<portlist>
A range of ports to show the limited multicast address configuration.
