DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
57
4-8 traceroute
Purpose
Used to trace the routed path between the switch and a destination endstation.
Format
traceroute <ipaddr> {ttl <value 1-60>} {port <value 30000-64900>} {timeout <sec 1-65535>} {probe
<value 1-9>}
Description
The
traceroute
command allows you to trace a route between the switch and a give host on the network.
Parameters
Parameters
Description
ipaddr
IP address of the destination endstation.
ttl <value1-60>
The time to live value of the trace route request. This is the maximum
number of routers The traceroute command will cross while seeking
the network path between two devices.
port<value
30000-64900>
The port number. Must be above 1024. The value range is from 30000
to 64900 .
probe<value 1-9>
The number of probes. The range is from 1 to 9 .
Restrictions
You must have administrator privileges.
Example
Trace the routed path between the switch and 10.48.74.121.
D G S - 3 2 0 0 - 1 0 : 4 # t r a c e r o u t e 1 0 . 4 8 . 7 4 . 1 2 1 p r o b e 3
C o m m a n d : t r a c e r o u t e 1 0 . 4 8 . 7 4 . 1 2 1 p r o b e 3
1 < 1 0 m s . 1 0 . 4 8 . 7 4 . 1 2 1
1 < 1 0 m s . 1 0 . 4 8 . 7 4 . 1 2 1
1 < 1 0 m s . 1 0 . 4 8 . 7 4 . 1 2 1
D G S - 3 2 0 0 - 1 0 : 4 #
