manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Cli Manual

The D-Link xStack DGS-3200 Series is a versatile networking product designed for businesses. To ensure seamless setup and operation, make sure to download the free User Manual from our website. Get instant access to the comprehensive manual, guiding you through the product's features and configurations effortlessly.

Share
Download
background image

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual 

 

189

 

  Parameters 

  Description 

group_id 

Specifies the group ID to be deleted. 

group_name 

The name of the protocol group.   

Restrictions 

You must have administrator privileges. 

 

21-5 

show dot1v_protocol_group

 

Purpose 

Display the protocols defined in a protocol group. 

Format 

show dot1v_protocol_group {group_id <id> | group_name <name>} 

Description 

Display the protocols defined in protocol groups. 

Parameters 

  Parameters 

  Description 

group_id 

Specifies the ID of the group to be displayed if group id is not specified, 

all configured protocol groups will be displayed 

group_name 

The name of the protocol group.   

 

Restrictions 

None. 

21-6 

config port dot1v

  

Purpose 

Assign the VLAN for untagged packets ingress from the portlist based on the protocol group configured. 

Format 

config port dot1v ports [<portlist> | all] [add protocol_group [group_id <id>| group_name <name>] 

[vlan < vlan_name 32>    | vlanid <vlanid>] 

 

{priority <value 0-7>}

 

| delete protocol_group [group_id 

<id>|all]] 

Description 

Assign the VLAN for untagged packets ingress from the portlist based on the protocol group configured. 

This assignment can be removed by using the 

delete protocol_group

 option. 

When priority is not specified in the command, the port default prority will be the priority for those untagged 

packets classified by the protocol VLAN. 

Summary of Contents for xStack DGS-3200 Series




























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3200 Series

D-Link DSL-2750U Quick Start Manual preview
DSL-2750U
Brand: D-Link Pages: 2
A-Link WNAP4G Quick Installaion Manual preview
WNAP4G
Brand: A-Link Pages: 6
Belkin F5D9001 Series Manual preview
F5D9001 Series
Brand: Belkin Pages: 72
Helmholz REX 200 Quick Start Manual preview
REX 200
Brand: Helmholz Pages: 28
Usr USR4504 Installation Manual preview
USR4504
Brand: Usr Pages: 2
IBM totalstorage 200 Hardware Installation Manual preview
totalstorage 200
Brand: IBM Pages: 152
Juniper MX2010 Hardware Manual preview
MX2010
Brand: Juniper Pages: 825
Alcatel Speed Touch 591s Technical User'S Manual preview
Speed Touch 591s
Brand: Alcatel Pages: 184
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
StarTech.com ST1000SMPEX Instruction Manual preview
ST1000SMPEX
Brand: StarTech.com Pages: 9
Trend Micro IPS Pro-Module-24C-GE-BP-TM Quick Setup Manual preview
IPS Pro-Module-24C-GE-BP-TM
Brand: Trend Micro Pages: 3
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
Hama 00176547 Operating Instruction preview
00176547
Brand: Hama Pages: 25
Infoblox Infoblox-250 Installation Manual preview
Infoblox-250
Brand: Infoblox Pages: 16
VideoWave Adam Device User Manual preview
Adam Device
Brand: VideoWave Pages: 12
Hawking H-CF30W Quick Installation Manual preview
H-CF30W
Brand: Hawking Pages: 21
ORiNG TGXPS-1080-M12-MV Series Quick Installation Manual preview
TGXPS-1080-M12-MV Series
Brand: ORiNG Pages: 2
ZyXEL Communications P-2602H Series Specifications preview
P-2602H Series
Brand: ZyXEL Communications Pages: 2

Brands by name

Popular brands

Load more brands