D-Link TM DES-6500, Command Line Interface Reference Manual

Page: 26 / 267

show serial_port
Purpose Used to display the current serial port settings.
Syntax show serial_port
Description This command displays the current serial port settings.
Parameters
None.
Restrictions None
Example usage:
To display the serial port setting:
DES-6500:4#show serial_port
Command: show serial_port
Baud Rate : 115200
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DES-6500:4#
config serial_port
Purpose
Used to configure the serial port.
Syntax config serial_port {auto_logout [never|2_minutes|5_minutes|10_minutes|
15_minutes]}
Description This command is used to configure the serial port’s baud rate and auto logout
settings.
Parameters
never
−
No time limit on the length of time the console can be open with no user
input.
2_minutes
−
The console will log out the current user if there is no user input for
2 minutes.
5_minutes
−
The console will log out the current user if there is no user input for
5 minutes.
10_minutes
−
The console will log out the current user if there is no user input for
10 minutes.
15_minutes
−
The console will log out the current user if there is no user input for
15 minutes.
Restrictions
Only administrator-level users can issue this command.