D-Link TM DES-6500, Command Line Interface Reference Manual, Page: 210 / 267

config vrrp vrid
routers participating within the same VRRP group. The default
setting is
true .
critical_ip <ipaddr> - Enter the IP address of the physical device that
will provide the most direct route to the Internet or other critical
network connections from this virtual router. This must be a real IP
address of a real device on the network. If the connection from the
virtual router to this IP address fails, the virtual router will be disabled
automatically. A new master will be elected from the backup routers
participating in the VRRP group. Different critical IP addresses may
be assigned to different routers participating in the VRRP group, and
can therefore define multiple routes to the Internet or other critical
network connections.
critical_ip_state [enable | disable] – This parameter is used to enable
or disable the critical IP address entered above. The default is
disable .
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure a VRRP entry: