D-Link TM DES-6500, Command Line Interface Reference Manual

Page: 121 / 267

DES-6500
config link_aggregation algorithm
ip_source
−
Indicates that the switch should examine the IP source address.
ip_destination
−
Indicates that the switch should examine the IP destination
address.
ip_source_dest
−
Indicates that the switch should examine the IP source
address and the destination address.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure link aggregation algorithm for mac-source-dest:
DES-6500:4#config link_aggregation algorithm
mac_source_dest
Command: config link_aggregation algorithm
mac_source_dest
Success.
DES-6500:4#
show link_aggregation
Purpose Used to display the current link aggregation configuration on the switch.
Syntax
show link_aggregation {group_id <value 1-32>|algorithm}
Description This command will display the current link aggregation configuration of
the switch.
Parameters
<value>
−
Specifies the group id. The switch allows up to 32 link
aggregation groups to be configured. The group number identifies each
of the groups.
algorithm
−
Allows you to specify the display of link aggregation by the
algorithm in use by that group.
Restrictions None.
Example usage:
To display Link Aggregation configuration: