D-Link TM DES-6500, Command Line Interface Reference Manual

Page: 242 / 267

Usage Example
To display an OSPF area’s settings:
DES-6500:4#show ospf area
Command: show ospf area
Area Id Type Stub Import Summary LSA Stub Default Cost
-------------- ------------- -------------------------------------- ----------- -----------
0.0.0.0 Normal None None None
10.48.74.122 Stub Enabled Enabled 1
Total Entries: 2
DES-6500:4#
create ospf host_route
Purpose Used to configure OSPF host route settings.
Syntax create ospf host_route <ipaddr> {area <area_id>/metric <value>}
Description This command is used to configure the OSPF host route settings.
Parameters
<ipaddr>
−
The host’s IP address
<area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
<value>
−
A metric between 1 and 65535, which will be advertised.
Restrictions Only administrator-level users can issue this command.
Usage Example
To configure the OSPF host route settings:
delete ospf host_route
Purpose Used to delete an OSPF host route.
Syntax delete ospf host_route <ipaddr>
Description This command is used to delete an OSPF host route.
Parameters
<ipaddr>
−
The IP address of the OSPF host.
DES-6500:4#create ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Command: create ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Success.
DES-6500:4#