DES-6500
DES-6500:4#disable rip
Command: disable rip
Success.
DES-6500:4#
show rip
Purpose
Used to display the RIP configuration and statistics for the switch.
Syntax
show rip {ipif <ipif_name>}
Description
This command will display the RIP configuration and statistics for a
given IP interface or for all IP interfaces.
Parameters
<ipif_name>
−
the name of the IP interface for which you want to display
the RIP configuration and settings. If this parameter is not specified, the
show rip
command will display the global RIP configuration for the
switch.
Restrictions none.
Example Usage:
To display RIP configuration:
DES-6500:4#show rip
Command: show rip
RIP Global State : Disabled
RIP Interface Settings
tication
------------- ------------------ ---------- ------------- ---------- -----
Interface IP Address TX Mode RX Mode Authen- State
System 10.41.44.33/8 Disabled Disabled Disabled Disabled
Total Entries : 1
DES-6500:4#
Summary of Contents for TM DES-6500
