D-Link Nuclias Connect Hub Plus DNH-200 User Manual Download Page 86

Page: 86 / 141

Nuclias Connect Hub Plus User Manual

AP Network

obtain an API key:

REST API

Enable or disable information requests through REST API.

REST API Key

Click Generate/Regenerate Key to generate an API key to
be used for API data request authentication. Then copy
this key in your application when initiating sessions with
the Hub.

Click

Save

to save the values and update the screen.

Alerts

The Alerts tab allows you to configure the alert event types. Check the types of events that
should generate an alert. Navigate to

System > Settings

and click the

Alerts

tab.

To view

generated alerts

go to

Log > Alerts

to view alerts.

Configure whether alerts or email notifications should be generated for the following
events:

Site/Network Events

Firmware Upgraded Failed, Device Has Been Removed
From Network, Profile Has Been Changed, and Profile
Failed To Be Applied.

Device Events

Device Restarted, Device Offline, Device Online, Port Link
Down, and Port Blocked.

Click

Save

to save the values and update the screen.

Resources

The Resource page allows you to browse the online documents for quick setup,
implementation guidelines, and troubleshooting tips. Navigate to

System > Resources.

Summary of Contents for Nuclias Connect Hub Plus DNH-200














































































































































Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands

D-Link Nuclias Connect Hub Plus DNH-200, User Manual

Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands