D-Link Nuclias Connect Hub Plus DNH-200 User Manual Download Page 121

Page: 121 / 141

Nuclias Connect Hub Plus User Manual

Nuclias Connect App

121

Tap

Push Provision File

to continue.

The AP login pop-up window appears. Enter the username and password to access the
selected AP.

10.

Tap

Apply

to continue the login process. The Modify IP Information page appears. The

entries can be modified.

Cancel

Discard any changes and continue.

Done

Accept any changes and continue the process.

Model Name

Displays the model name of the listed AP.

MAC

Displays the MAC address of the listed AP.

DHCP Mode

Enable or disable the DHCP mode function. When enabled,
the AP establishes dynamic IP addressing with authorized
clients.

IP Address

Enter the IP address of the AP.

Summary of Contents for Nuclias Connect Hub Plus DNH-200














































































































































Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands

D-Link Nuclias Connect Hub Plus DNH-200, User Manual

Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands