Nuclias Connect Hub Plus User Manual
Nuclias Connect App
126
For L3 network, enter a range of IP addresses. Tap add
+
to create a new IP range. Tap
remove
-
to delete a defined range.
2.
Tap
Next
to initiate the discovery process. Alternatively, tap
Configure Access Point
Profiles
at the bottom of the page to add or delete any local profiles.
Upon completing the scan, a list of detected APs will be displayed. Tap the radio button
next to an AP to select it. The selected local provision file will be pushed to the selected
APs. Tap
Push Provision File
to continue.
3.
The AP login window appears. The IP and MAC address are shown at the top of the
window. Confirm the selection and enter the username and password to access the
selected AP. Tap
Apply
to continue.
