D-Link Nuclias Connect Hub Plus DNH-200 User Manual Download Page 128

Page: 128 / 141

Nuclias Connect Hub Plus User Manual

Nuclias Connect App

128

SSID-#

Enable or disable the SSID. The # character indicates the index of the
SSID.

SSID Name

Change the current name of the SSID.

Security

Select wireless security mode: Open System (default), WPA Personal,
or WPA-Enterprise.

Wireless Information
Radio Band

Select a specific radio band: Off, 2.4G, 5G, or 2.4G / 5G.

Radio 2.4G
Mode

Select a specific 2.4G radio mode: Mixed 802.11n, 80211g and
802.11b; Mixed 802.11g, 802.11b; 802.11n Only.

Radio 5G Mode

Select a specific 5G radio mode: Mixed 802.11n, 80211a; 802.11a
Only; 802.11n; Mixed 802.11ac.

Country Code

Displays the assigned country for the AP.

Copy & Save Configuration
Apply
Configuration

Select an alternative AP in the discovered list to push the current
configuration.

Save Configuration

Save the current configuration profile and enter a name for it.

Summary of Contents for Nuclias Connect Hub Plus DNH-200














































































































































Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands

D-Link Nuclias Connect Hub Plus DNH-200, User Manual

Search results

Summary of Contents for Nuclias Connect Hub Plus DNH-200

Reviews:

Related manuals for Nuclias Connect Hub Plus DNH-200

Brands by name

Popular brands