Nuclias Connect Hub Plus User Manual
AP Network
68
Device Settings
The Device Settings page allows you to view and configure the login and accessibility settings
for access points in this network.
Navigate to
Configuration > Profile Settings > [Site] > [Network] > Device Setting
to view
existing settings.
Username
Enter the administrative username that is used to
access configuration settings for all access points on the
network. Do not use special characters such as %, !, and #.
Password
Enter the administrative password that is used to access
configuration settings for all access points on the network.
The password must be 8-30 characters and contain both
lowercase or uppercase alphabetic characters and
numbers.
Console Settings
Enable
Check the box to enable the console function.
Console Protocol
Select the console protocol that is applied to all access
points on the network: Telnet or SSH.
Time Out
Select the active console session time-out value in
minutes.
LED Settings
Status
Turns LED indicator on or off.
Social Login Setting
Refer to
Profile Settings > SSID
for
User Authentication
using social login.
Facebook Client/Secret ID
If using Facebook Sign-in method, enter the client and
secret ID.
