Nuclias Connect Hub Plus User Manual
System Settings
22
IPv4 Settings
Provision
Select either
Dynamic IP (DHCP)
or
Static IP Address
:
DHCP automates the assignment of IP addresses,
subnet masks, default gateways and other settings.
On the other hand, Static IP addressing scheme
requires you to enter IP addresses, subnet masks,
default gateways and other settings manually.
Obtain DNS Servers
Automatically or Configure DNS
Servers Manually
If DHCP is selected, choose to either obtain DNS
server settings automatically or enter them manually.
IPv4/Subnet Mask
If Static IP Address is selected, assign an IPv4 address
and the subnet mask, which are used for networked
devices to communicate and determine the subnet of
the IP address respectively.
Gateway
If Static IP Address is selected, enter the gateway IP
address. This is the address of a router interface
connected to the Hub that forwards packets out to
another subnet or network.
Primary DNS
Enter the IP address of a DNS server.
Secondary DNS
Enter the IP address of a DNS server as a backup if the
primary DNS server fails.
IPv6 Settings
Provision
Select
Static IPv6 Address
,
IPv6 Auto Configuration
or
Local Connectivity Only
.
DHCP automates the assignment of IP addresses,
subnet masks, default gateways, and other settings.
On the other hand, Static IP address scheme requires
you to enter IP addresses, subnet masks, default
gateways and other settings manually. Select
Local
Connectivity Only
to use the link-local address of the
device for the local network.
Obtain DNS Servers
Automatically or Configure DNS
Servers Manually
If Auto Configuration is selected, choose to either
obtain DNS server settings automatically or enter
them manually.
IPv6 Address/Prefix Length
Enter the IPv6 address and prefix length. The prefix is
used to identify the
IPv6 network. The valid range is 1-
128.
